Water Bottle Cap Assembly Machine LSN-A2S
Water Bottle Cap Assembly Machine LSN-A2S — view 1
Water Bottle Cap Assembly Machine LSN-A2S — view 2
Water Bottle Cap Assembly Machine LSN-A2S — photo 3
Cap Assembly Machine

Water Bottle Cap Assembly Machine LSN-A2S

For assembly top cover, inner cap and bottom cap by press and rotary in one machine, it can save much labor cost, and increase your production efficient.

Model
LSN-A2S
Material
SUS304+Aluminum profile
Warranty
2 years
Certification
CE,ISO
Brand
LONGSN
Download Catalogue
  • 2 yearsquality guarantee
  • 30–65 daysnormal production time
  • On siteinstallation and training

Manufactured by Zhangjiagang Longsn Machine Co., Ltd. under ISO 9001:2000 and CE — 20+ years of bottle packaging machinery.

Product Details

About the Cap Assembly Machine

sport cap assembly machine

Specification

  1. Top and bottom cap of hinge cap, completely automatic press fits the assembly.
  2. Feed in cap material by vibratory disk.
  3. To avoid the abrasion outward appearance while process of press fit d. The machine can produce for different complicated separated and doublets caps combination.
  4. Widely used in cosmetic, drinks, chemical, medical, food industry etc, which can highly improve productivity and product quality.
  5. PLC control system, frequency conversion speed controller, full automatic and high speed.
  6. Suitable for the assembly of the all kinds of separated caps produced by injection molding machine.
  7. Easy to change bottles in very short time.
  8. High efficiency, low failure rate, no secondary pollution, instead of low yield by manual capping, saving a lot of labor capital for business.
  9. Strong targeting, according to customers different demand. Meet customers’ satisfaction k. Easy maintenance and operation.
sport cap assembly machine — view 2
Technical Parameters
Specification of capProductive capacity (PCS/MIN)Power voltage (V)Total powerExternal dimension (L x W x H) mmNet weight (kg)
20-8030-160(Customized)2201.53000×1000×1500580
cap assembly machine
sport cap assembly machine — view 3
cap assembly machine — view 2
  • Water Lid Assembly Machine
  • automatic plastic bottle cap assembly machine
  • automatic assembly machine water cap
  • plastic lid assembly machine
  • Water Cap Assembly Machine
  • water bottle cap assembly machine

Service & Warranty

Warranty, Spare Parts and Installation

The same terms apply to every machine LONGSN ships. More detail on the Support page.

  1. 01

    Two-year quality guarantee

    Every LONGSN machine carries a 2-year quality guarantee. Within those two years replacement parts are supplied free of charge and LONGSN bears the delivery charge.

  2. 02

    Spare parts shipped with it

    One year's supply of the most easily worn spare parts is packed and shipped together with the machine, so the line is not held up waiting for a small item.

  3. 03

    On-site installation and training

    LONGSN sends engineers to your factory to install and commission the machine and to train your operators until they can run it independently.

  4. 04

    Production in 30 to 65 days

    Normal production time is around 30 to 65 days depending on the machine ordered. Shipping is by sea or by air and delivery dates agreed by both sides are kept.

Also includedA detailed English instruction book is supplied with every machine, and an installation video is available.

The Factory

Made by Longsn in Zhangjiagang since 2003

Zhangjiagang Longsn Machine Co., Ltd. is a professional manufacturer integrating development, research, design, manufacturing, technical service and marketing of complete sets of bottle packaging machines.

Neck cutting, leak testing, bagging and cap line machines are built in-house. Customers are warmly welcome to visit the factory.

Founded
2003
Machine categories
15
Certification
ISO 9001:2000 · CE
Location
Zhangjiagang, Jiangsu
More about the factory
  • LONGSN assembly workshop in Zhangjiagang
  • Bottle packaging machine under assembly at LONGSN
  • LONGSN engineer checking a machine on the workshop floor

Certificates & Audits

CE Certificates and SGS Factory Audit

Scans of the originals are kept at the factory and can be sent with your quotation. See them all on the About page.

  • CE Certificate — Packaging Machine Line held by LONGSN

    CE Certificate — Packaging Machine Line

    UDEM International Certification, TurkeyNo. M.2020.206.C4712
  • CE Certificate — Auto Cap Lining Machine held by LONGSN

    CE Certificate — Auto Cap Lining Machine

    UDEM International Certification, TurkeyTested to EN 60204-1, EN ISO 12100, EN 415-10, EN 415-3
  • SGS On-Site Audit Report held by LONGSN

    SGS On-Site Audit Report

    SGS-CSTC Standards Technical Services Co., Ltd.Third-party factory audit

Get a Quote

Tell us your bottle, cap and target output

Send your bottle sample, material and the output you need. LONGSN engineers reply with the right model, the settings for your bottle and a full quotation.

Send an inquiry

We reply within one working day.

Related Machines

More Cap Assembly Machines

Other models in the same category. Open a machine for its specifications, photos and full description.

All machine categories

FAQ

Water Bottle Cap Assembly Machine FAQ

Questions buyers ask about this machine. Warranty, delivery and installation terms are on the FAQ page.

Q1What is a water bottle cap assembly machine?

It puts the separate parts of a water bottle cap together. LSN-A2S presses and turns the top cover, inner cap and bottom cap into one cap in a single machine.

Q2How many caps per minute does the LSN-A2S assemble?

30 to 160 pieces per minute, customized to your cap. PLC control and a frequency conversion speed controller set the speed.

Q3How are the cap parts fed into the lid assembly machine?

A vibratory disk feeds the cap parts in, and the press fit is done without scratching the outside of the cap. The machine can also assemble complicated separated and double caps.

Q4Which industries use the LSN-A2S?

Cosmetic, drink, chemical, medical and food packaging. It suits all kinds of separated caps made on injection moulding machines.

Q5What power and space does the LSN-A2S need?

220 V and 1.5 kW total power. The machine is 3,000 × 1,000 × 1,500 mm and weighs 580 kg.